- Rear platform for operator to ride
- Straddle leg design
- 3300 lbs lift capacity
- 177" lift height
This is our highest lifting straddle leg powered drive / powered lift pallet stacker. This walkie stacker is a walk behind and will work perfectly both in both small and large warehouses.
This electrically powered forklift will lift a total of 3300 pounds to a height of 177". Its operation is smooth both in lifting and moving. The ergonomic handle easily allows you to control all of the motions.
Straddle leg pallet stackers allow the forks to lower directly to the floor with the stabilization legs straddling either side of the pallet. Advantages of this design are it allows you to pick up closed bottom pallets directly from the floor. Disadvantages are it is more expensive to purchase/ship and it takes up more space.
Power
24-volt powered lift and drive system.
Deep cycle batteries with on-board charger.
Drive Unit
Drive unit is equipped with an electromagnetic disc brake that is spring applied and electrically released. Brake is activated by the control handle position. Regenerative motor braking assists brake effort and improves component life.
Visibility
A clear-view mast and low-profile power unit allow operators to clearly see the forktips, providing excellent visibility and reducing product damage.
Control Handle
The control handle is designed to allow for an optimum turning radius with low-steer effort. All control buttons can be operated with either hand and can be accessed with minimum hand and wrist movement. An ergonomic forward / reverse thumb wheel allows for precise maneuvering.
This is our most popular powered drive / powered lift pallet stacker.
Pallet Stacker, Electric Forklift, Lift Truck Selection Guide:
The average empty pallet weighs approximately 50 pounds. Some weigh in at more than 80 pounds. Choosing an efficient method of gathering and managing pallets can mean the difference between profit and loss--employee safety and hazardous working conditions. And what about full pallets? If not moved properly, you risk product damage and steep drops in quality. When it comes to efficient storage and distribution, the pallet stacker you choose is critical. Its use will save time and money and also prevent needless injuries.
Key Specifications - Lift Height and Weight Capacity
Manual Drive or Electric Drive?
Stabilization Legs
Self Propelled Pallet Stacker Trucks:
Self-propelled stackers are an alternative to a full-blown forklift in a warehousing, manufacturing or particularly retail operation. Because most of the self-propelled stackers are powered by pollution free electric motors, they can be used effectively in major warehouse style retail stores to move heavy merchandise from shelving as much as 12 feet in the air. Vertical storage makes more effective use of expensive warehouse space and by utilizing a powered stacker, loads up to 3500 pounds can be safely lifted and positioned.Self-propelled stackers are similar to forklift trucks but not as large or as expensive usually. Yet, you can take a stacker to the loading dock, pick up a loaded pallet of merchandise, travel with it back to the retail store side of the operation, position your stacker unit at the shelf up to twelve feet in the air and smoothly lift the pallet and merchandise to the level of the storage shelf and remove the forks from the pallet, leaving the merchandise and pallet safely positioned on a shelf.
Self-propelled stackers are usually constructed of steel with the wheels of polyurethane. The controls for raising and lowering the forks, forward and reverse speeds and the brake are generally located in the handle on the heavy duty models or as a separate lever for raising and lowering the forks on the medium duty units.
The unit is steered with the aid of a butterfly handle which tilts and twists as well as lowering or raising as required. A double safety braking system is available on the self-propelled stackers. Not only does the dead man’s feature prevent riderless runaway vehicles, but the unit ensures protection from dropping carriage, forks or mast.
The mast is the upright portion of the stacker on which the carriage rides that does the actual work of raising or lowering the forks. The mast also serves as protection for the operator from loads falling backward onto the stacker.
The stabilization legs and the forks may be adjustable for different pallet sizes or support needs. Stabilization legs may be straddle type, fork over or in some instances there will be no stabilization legs, being replaced by a counterweight sytem.
Although the self-propelled stackers are not capable of a high rate of speed—most have a top speed of around 5 miles per hour—they can still travel fast enough to create some safety hazards. Pushing the top limits of speed, especially with the load extended can create top-heavy conditions and may lead to longer stopping times in an emergency stop situations. Although visibility is excellent on the empty stackers, when loaded they have almost no front visibility. Particularly in high traffic areas, care must be taken to avoid running into or over other employees.
Other common safety issues with equipment of this type is running over feet.
4 comments:
Need a web site to sell your forklifts, or need a web site to a lift truck? Visit www.buyandsellaforklift.com and see how easy it isfor all your fork lift needs.
Hello this is really very nice post.
I like this type of post so much which full of information...
Thanks for sharing this post.
2 Post Car Hoist
Hi, This blog is very useful. It is describe how hydraulic stacker lifts are make our routine easy and comfortable. Essem Engineers is also design these stacker lifts using best quality raw materials.
Hey friend is that offer valid to buy used forklift because I am looking any good conditioned forklift for my warehouse work if this offer valid so I will purchase soon your forklift.
Post a Comment